Alpine TDM-7580R, Owner'S Manual

Page: 15 / 26

13
-EN
Controlling CD Changer (Optional)
If an optional Alpine 6-disc CD Changer (M-Bus)
is connected to the 8-pin DIN connector of the
TDM-7583R/TDM-7581R/TDM-7580R you can
control the CD Changer using the TDM-7583R/
TDM-7581R/TDM-7580R.
NOTE
The CD controls on the TDM-7583R/TDM-7581R/TDM-
7580R for the CD operation are functional only when the
CD Changer is interconnected with the TDM-7583R/
TDM-7581R/TDM-7580R.
1
Press the SOURCE button to activate the CD
Changer.
The display shows the disc number and track
number.
2
Make sure that the Function indicator illuminates,
then press the Preset buttons to select the
desired disc loaded in the CD Changer.
3
To pause playback, press the - / J button.
Pressing the - / J button again will resume
playback.
NOTES
•
If the "F" indicator is illuminated the Disc Select
buttons become nonfunctional.
•
Press the SOURCE button to activate the CHANGER
mode.
•
Only compact discs containing the mark shown can be
used.
•
We cannot fully guarantee the playback of CD-R (CD-
Recordable). You cannot playback CD-RW (CD-
ReWritable) on this unit.
CD Changer Operation
DN
g f
UP
SOURCE
- / J
Preset buttons
Music Sensor (M.S.) Skip
1
Press the DN g button once to return to the
beginning of the current track.
If you wish to return to the beginning of a track
further back, repeatedly press until you reach the
desired track.
Press the f UP button once to advance to the
beginning of the next track.
If you wish to advance to a track further ahead,
press repeatedly until the desired track is
reached.
NOTE
The music sensor feature is functional in the play or
pause mode.
Fast Forward and Backward
1
Press and hold the DN
g
or
f
UP button to
quickly move backward or forward respectively
until you reach the desired portion.
NOTE
This feature works only in the CD playback mode.