Assembling Your Solar Garden Product Continued
•
Choose an appropriate, sunlit area to display your solar light.
•
Let your solar light charge for 8 hours.
•
Enjoy your Alpine Solar Light!
°
NOTE
(
Refer to Diagram 3 above
): To replace your NI-CD Rechargeable
Battery, Twist off the Light Cover. Open the Battery cover. Replace
Battery with Alpine NI-CD Rechargeable Battery. Replace Battery Cover
and twist on the Light Cover. Refer to steps 1-5 above.
Trouble Shooting & Caution
If you have any questions and/or problems, please contact the retail store where
you purchased this light.
If Your Solar Garden Product Fails to Illuminate
•
Be sure that the solar panel is in direct sunlight. Do not allow
anything to cover the solar panel.
•
Do not leave your solar light underneath a night time light
source, such as a street light, as this will prevent the light from
switching on at night (see above).
•
Test the solar panel by covering it with your hands to see if the
light turns on, if it does not check the battery to be sure it is
intact.
•
If your battery is intact, but does not appear to work properly,
dispose of it and replace it with a new Alpine Rechargeable
Battery.
Caution
o
Do not operate in water.
o
Store the unit in a dry place if not in use for an extended
period of time.
o
Dispose of all batteries properly.
o
DO NOT DISPOSE OF BATTERY IN FIRE.
Owner’s Manual
Unpack all components carefully. Please check to ensure all parts have been
removed from the packaging.
How Your Solar Garden Product Works
Solar lights run by electricity generated through the solar panel to charge the
internal NI-CD rechargeable battery. Your new solar light will automatically
illuminate at night through light sensor technology. The duration of illumination
will depend on the amount and quality of sunlight the solar panel receives.
Components:
•
Floating Solar Powered LED Light
•
NI-CD Rechargeable Battery
Using Your Solar Garden Product for the First Time
●
Install your solar light in direct sunlight and charge for a
full
8 hours in
direct sunlight. Once the solar light has been fully charged, the light will
automatically turn on at dusk.
Note:
Be sure to twist off the light/solar
panel cover and remove the tab located near the NI-CD Battery cover,
see step 1 above.
•
Twist the light cover back onto the Solar Powered LED light top. Be sure
it is locked into place, refer to step 2.
Assembling Your Solar Garden Product
•
Drop your Floating Solar Light into any water feature.
•
If you would like to anchor your new Floating Solar Light, using fishing
line, wrap one end of the fishing line around a rock. Slip the other side of
the fishing line through the small hole on the bottom (opposite side of the
solar panel). Tie tightly. Place wherever you desire in your water
feature.
