ALPINE S-A60M/S-A32F/S-A55V 68-35792Z59-A (EN/FR/ES)
7
-EN
EN
FR
ES
Cautions on wire lead connections
When using third-party wire cables (power supply
wire), use the supplied screws to simplify the
connection. Refer to the description below for the
proper procedure. If you are in doubt about how to
make this connection, consult your dealer.
1. Check the wire size.
•
For details on the wires size to be used, refer to
the supplied “Cautions on Power Supply Wires
Connection” and “Cautions on Power Supply
Wires” (page 19), and then use the wire of
the specified size.
•
If the wire gauge used is unknown, ask your
dealer.
2. Remove the insulation from the ends of the wire
leads by about 7 – 10 mm (9/32” – 13/32”).
Lead end side of
the product
Twist the tip of wire leads
7 – 10 mm
(9/32” – 13/32”)
NOTES:
•
If length of the exposed wire is too short, a poor
connection may occur causing operation failure
or sound interruption.
•
On the other hand, if the length is too long, an
electrical short-circuit may occur.
3. Tighten the hexagon hole screw with the
hexagon wrench (included) to secure the lead.
Before making this connection, use insulated
shrink tubing to cover any exposed wire
extending beyond the terminal.
Power Supply Terminal
Hexagon Wrench (included)
Battery Lead
Remote Turn-On Lead
Power Supply Terminal
Ground Lead
Hexagon hole screw
(e.g. S-A32F)
Speaker Output Terminals
Hexagon Wrench (included)
Hexagon hole screw
Speaker Output Lead (+)
Speaker Output Lead (–)
Speaker Output Terminals
(e.g. S-A32F)
NOTES:
•
Be sure to use the Hexagon hole screw attached
to the Power Supply Terminal (
) or Speaker
Output Terminals (
).
•
For safety reasons, connect the battery leads last.
•
To prevent disconnection of the leads or
dropping of the unit, do not use the cabling to
carry the unit.
, refer to
ly Wires
upply
e of
y)
our head
able, see
eads of
er-RCA
u do not
ead,
ion of
NG”
the
e,
y
re metal
point to
uity
all your
n the
eeping
, refer to
ly Wires
upply
e of
s on your
r
arately).
ections;
This is an
ofer
affected
he
ace
the