Jeep Wrangler
PSS-24WRA V20211025
7/15
Front speaker removal and installation (continued)
13
Remove the (4) 10mm screws and the (1) 8mm
screw securing the dashboard brace. The brace
only needs loosened to aid in removing the
speaker pod in the next step.
15
There is an electronic module attached to the
back of the pod which must be removed and
reused in kit assembly.
17
Pry outward in the bolt cover on the right end
of the grab bar and remove the (2) 10mm bolts
securing it to the dash.
14
Remove the (3) Phillips screws securing the
speaker pod, then unplug and remove. the pod.
16
Open the passenger door and remove the panel
on the right end of the dash. Remove the (5),
Phillips screws exposed.
18
Remove the glovebox then remove the (3) Phillips
screws exposed.
