Alpine KTX-CMO Installation Manual Download Page 8

Climate & Convenience Controls (Continued)

Fan Speed Control

To increase fan speed, press the fan speed UP button on the control panel (pg. 4, Fig. 1, #1 
). On the color TFT touch screen a graphic level indicator will move up indicating the current 
fan speed (pg. 4, Fig. 2, #1 0). There are a total of 12 fan speed increments from completely 
off to maximum.

To decrease fan speed, press the fan speed DOWN button on the control panel (pg. 4, Fig. 
1, #2). On the color TFT touch screen a graphic level indicator will move down indicating 
the current fan speed (pg. 4, Fig. 2, #1 0). Continue pressing the DOWN button to turn fan 
completely off.

Temperature Control

Use the UP and DOWN arrows (pg. 4, Fig. 2, #1 & #2) on the color TFT touch screen to adjust vehicle air 
temperature. Touch the Red <Up> arrow to increase air temp. Touch the Blue <Down> arrow to decrease 
air temp. The temperature indicator will move up or down indicating the current temperature level. The
temperature range is color-coded: Red indicates warmer air and Blue indicates cooler air.

Air Flow / Vent Control

Touch the vent control mode (pg. 4,
Fig. 2, #9) on the color TFT touch

screen to toggle through the current

vent mode. Graphics are displayed
according to the selected vent and
airflow pattern.

Defog / Defrost Control

Touch the Defog (pg. 4, Fig. 2, #5) on the Color TFT touch screen to turn Defog On or Off. 
This configuration clears windows of fog or moisture. Air will be directed to the windshield 
and floor outlets.

Touch the Rear window defogger (pg. 4, Fig. 2, #6] on the Color TFT touch screen to turn the 
rear window defogger on or off. The rear window defogger turns off automatically 12 minutes. 
It can also be turned off by turning the ignition to ACC (ACCESSORY) or OFF position. If 
turned on again it runs for 6 minutes before turning off. At higher vehicle speeds, the rear 
defogger can stay on continuously.

Note: 

For best results clear the windows of snow or ice before defrost settings. DO NOT 

OPERATE VEHICLE UNTIL WINDOWS ARE CLEAR!

Air Conditioning

To turn the air conditioning ON or OFF press A/C button on the control panel (pg. 4, Fig. 1, 
#3). A Blue indicator light turns on. If the fan is turned off or the outside temperature falls 
below freezing, the air conditioning will not work. The air conditioning might automatically 
come on when Defrost mode is selected.

Touch the MAX A/C button (pg. 4, Fig. 2, #3) on the color TFT touch screen to turn on Max 
A/C. Maximum cooling will occur with the temperature is adjusted to lowest cold setting and 
the Fan speed is set at maximum. MAX A/C is used to cool the car down as quickly as pos

-

sible. Touch the Max A/C button again to return to the previous Fan speed and temp setting.

Touch the Re-circulate button (pg. 4, Fig. 2, #7) on the color TFT touch screen to turn on 
recirculation. Air will be re-circulated inside the vehicle. This mode helps to quickly cool the 
air inside the vehicle or prevent outside air and odors from entering. Operating recirculation 
mode while the A/C is off increases humidity and may cause the windows to fog. Recircula

-

tion is not available in the Defrost or Defog modes.

Heated Seats

Touch the driver’s seat heater (pg. 4, Fig. 2, #4) button on the color TFT touch screen to turn 
on the driver’s seat heater. The engine must be running to use heated seats. A Button graphic 
will show the level of heat selected: Two lights = high or one light = low). Press the button re

-

peatedly to cycle through the temperature settings or to turn the heated seat OFF. Touch the 
passenger’s seat heater (pg. 4, Fig. 2, #8] button on the color TFT touch screen to turn on the
Passenger’s seat heater. The engine must be running to use heated seats. A button graphic 
will show the level of heat selected: Two lights = high or one light = low). Press the button 
repeatedly to cycle through the temperature settings or to turn the heated seat OFF.

Air is directed to 

the instrument 

panel vent outlets

Air is directed to 

the instrument 

panel vent outlets 
and the floor vent 

outlets

Air is directed 
to the floor vent 

outlets

Air will be 

directed to the 
windshield and 

floor and/or side 
vent outlets

MAX

5

Summary of Contents for KTX-CMO









Reviews: