Display example for FM Radio main screen
①
Current frequency and band
②
Current state of stereo and local
③
Displays the preset number/frequency.
The button displays the current tuning mode.
Listening to the Radio
1
Press the [ Radio ] button.
The radio mode is activated and the display changes to
the Radio mode screen.
The display content varies depending on the last band
selected. ([FM1], etc.)
2
Touch [ BAND ] of Bottom banner to select the
desired radio band.
Each touch changes the bands as follows:
FM1
FM 2
FM3
AM1
AM2
FM1
3
Touch [ LOC ] to select the tuning mode.
There are two modes you can select for auto tuning, DX
and Local:
- DX (Distance) mode;
Both strong and weak stations will be tuned in.
- Local mode;
Only strong stations will be tuned in.
The initial setting is DX.
4
Touch [<<], [>>] to change the radio frequency up
or down respectively.
In manual mode, touch and hold to change the
frequency continuously.
Radio
Presetting Stations Manually
1
Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.
2
Touch and hold any one of the preset buttons for at
least 2 seconds.
The selected station is stored.
3
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2, FM3,
AM1or AM2).
If a preset memory has already been set in the same
preset number, it will be cleared and the new station
will be memorized.
Tuning to Preset Stations
You can tune in the preset stations in memory on either
band using its preset number.
1
Touch [Band] of Bottom banner repeatedly until the
desired band is displayed.
2
Touch any one of the preset buttons that has a
station stored to it.
The preset station is received.
①
②
③
8
