10
-EN
01GB05IVA-W502E.fm
ALPINE IVA-W502E 68-12118Z56-A (EN)
Accessory List
•
Head unit .............................................................................1
•
Power cable.........................................................................1
•
Mounting sleeve ..................................................................1
•
Bracket key..........................................................................2
•
Flush Head Screw (M5x8) ...................................................6
•
Screw (M5×8) ......................................................................8
•
Face plate............................................................................1
•
Mounting Position Seal ........................................................2
•
Pre OUT Cable ....................................................................1
•
AUX I/O Cable .....................................................................1
•
Owner’s Manual .............................................................1 set
Location of Controls
Remote Sensor
Point the optional remote control transmitter towards the
remote sensor within a range of 2 meters.
/
button
Press to adjust the volume.
MUTE button
Lowers the volume by 20 dB instantly. Press the button
again to cancel.
(OPTION) button
Press to recall the setting which is set in “Setting the VISUAL
Soft Button” (page 37).
If “V.SEL” is set, the VISUAL SETUP screen will be recalled.
If “TEL” is set, the TEL Bluetooth screen will be recalled
(when the optional Bluetooth Box is connected).
IMPRINT/AUDIO button
Press to recall the IMPRINT operation screen (When the
optional IMPRINT audio processor (PXA-H100) is
connected).
Pressing and holding for at least 2 seconds will recall the
AUDIO SETUP screen.
SOURCE/
button
Turns the power on. Press and hold for at least 2 seconds to
turn the power off.
Recalls the SOURCE selection screen.
OPEN button
Ejects a disc.
If the disc does not eject after pressing
OPEN
, press and
hold
OPEN
for at least 3 seconds.
RESET switch
Be sure to press the RESET switch when using the unit for
the first time, after installing the CD changer, after changing
the car battery, etc.
Turn off the unit power, press RESET with a ballpoint pen or
similar pointed object.
DISC indicator
Lights when a disc is inserted into the unit.
Turning Power On or Off
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
Press
SOURCE
/
to turn on the unit.
•
The unit can be turned on by pressing any button on the unit except
OPEN
.
2
Press and hold
SOURCE
/
for at least 2 seconds to
turn off the unit.
•
Some operation of the unit cannot be performed while the vehicle is
in motion. In this case, be sure to first stop your vehicle and apply the
parking brake, then perform the operation.
•
The IVA-W502E is a precision device. With gentle handling, its
unique capabilities can be enjoyed for a long time.
Getting Started
Optional Remote Control Interface Box
This unit is operable using the vehicle’s secondary radio controls.
An Alpine Remote Control Interface Box (optional) is required. For
details, contact your Alpine dealer.
About the button descriptions used in this Owner’s
Manual
•
The buttons found on the face of the unit are expressed in bold
(e.g.
SOURCE/
). The buttons found on the touch-screen
display are shown in bold within brackets, [ ] (e.g.
[SOURCE]
).
•
This Owner’s Manual explains mainly the function of soft
buttons, when a soft button and a unit button have the same
function.
01GB00IVA-W502E.book Page 10 Wednesday, February 20, 2008 4:12 PM
