36
-EN
01GB05IVA100R.fm
ALPINE IVA-D100R 68-05946Z50-A (EN)
System Setup Operation
1
Press
SETUP
.
The SETUP selection screen is displayed.
2
Touch
[
]
of OTHER SETUP.
The OTHER SETUP screen appears.
3
Touch
[
]
of SYSTEM SETUP.
The SYSTEM setup screen appears.
4
Touch
[
]
or
[
]
, etc., of the desired item to change
its setting.
Setting items:
IN INT. MUTE / NAV. IN / NAV. MIX
*
1
/ AUX IN / AUX IN LEVEL
*
2
/
AUX IN SIGNAL
*
2
/ AUX OUT / VISUAL KEY / ILLUM. COLOR
(IVA-D100R only) / SUBW. OUT
*
3
/ OPTICAL OUT
*
1
When ON is set in “Setting the Navigation Mode” (page 36),
the item is displayed.
*
2
When ON is set in “Setting the AUX Mode” (page 37), these
items are displayed.
*
3
Not displayed when an extarnal audio processor is connected.
5
Touch
[RTN]
to return to the previous screen.
•
Immediately after changing the settings of System Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
If an Alpine Ai-NET Interrupt Box (NVE-K200) is connected to the
IVA-D100R/IVA-D100RB, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to the
voice guidance of your navigation system when it occurs even while
you are playing a CD or DVD. The CD/DVD player will be
automatically muted during voice guidance. For further details, please
refer to the manual for NVE-K200.
Setting item: IN INT. MUTE
Setting content: OFF / ON
•
The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.
When you connect an optional navigation equipment, set it to ON.
Setting item: NAV. IN
Setting contents: OFF / ON
With an Alpine navigation system connected to the IVA-D100R/IVA-
D100RB, the voice guidance of the navigation system will be mixed
with the radio or CD play.
Setting item: NAV. MIX
Setting content: OFF / ON
To adjust the navigation interruption volume level, the adjustment
for NAV. LEVEL can be performed in “Adjusting the Audio” on
page 26 after setting to ON.
•
The audio volume during the navigation guide can be set by
adjusting the audio volume while the navigation guide continues.
When the navigation guide finishes, the previous audio volume and
the previous screen are restored. For exception, if the navigation cuts
in when the audio volume is lower than the setting level, the audio
volume during the navigation guide is reset the current listening
volume. (When the navigation guide cuts in, the audio volume does
not increase.)
•
This setting is effective when NAV.IN of SYSTEM list screen is ON.
SYSTEM Setup
The Parking Brake must be engaged to access the System mode
screen. Attempting to access this screen while driving will display
the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 5 are common operations to each
“Setting item” of SYSTEM Setup. Refer to each section for
details.
Setting the External Device Interrupt Mode
OFF:
The volume level can be adjusted in Interrupt mode.
ON:
Sound will not be output.
Setting the Navigation Mode
ON:
Navigation source is displayed.
OFF:
Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
Setting the Navigation Interruption
OFF:
The navigation interruption mode is turned off.
ON:
The navigation interruption mode is on.
01GB00IVAD100R.book Page 36 Friday, February 10, 2006 2:39 PM