43
Turning Guide Display On/Off (Rear/Front Camera only)
Turning the selected guide off.
1
Touch
[On/Off]
.
The currently selected guide will turn off.
2
To turn the guide on, touch
[On/Off]
again.
• Guides that are turned off are still adjustable.
Returning Guides to Default
1
Touch
[Default]
.
A message window will appear.
2
Touch
[OK]
.
Adjusted values will return to default settings.
You can set whether to display the rear camera image when the gear
lever is moved to the reverse (R) position while the unit is turned off.
You can select this item only when Camera Select is “Rear.”
Setting item:
Interrupt (Power OFF)
Setting contents:
On (Initial setting) / Off
When connecting the optional Multi Camera Interface module, you can
connect up to 3 cameras as Front Camera/Rear Camera/Side Camera.
• When using the optional Multi Camera Interface module, select
“Camera Selector” to set the “Front Camera /Rear Camera/Side
Camera” to ”On”(
)/”Off ”(
).
Setting item:
Front Camera / Rear Camera / Side Camera / Default Camera*
1
Setting contents:
Off (Initial setting) / On
*1
You can change the Default Camera only when you set more than one
camera for Front Camera/Rear Camera/Side Camera to “On.” For
details, see “Setting a Default Camera” (page 43).
Setting a Default Camera
When connecting an optional Multi View Camera, you can set which
camera image is displayed when you touch the Camera button on the
Menu screen.
Setting item:
Default Camera
Setting contents:
Front / Rear / Side
• The initial setting differs depending on the cameras set to “On” in
“Setting Multi Camera to On/Off.”
You can select to view front or rear camera image for a moment even if
you shift the gear lever from reverse(R) to other position.
Setting item:
Shutdown Delay*
1
Setting contents:
Off (Initial setting)/On
*1
You can set this item only when Camera Select is “Rear”, or when
“Camera Selector” is selected and “Rear Camera” is “On”.
*2
Only when front camera is connected.
*3
When there is no connected front camera.
*4
When the vehicle is moving forward and the speed is greater than a
certain value, the monitor will return to previous source screen
automatically.
Camera Interrupt Setting (Power OFF Mode)
(Rear Camera Only)
On:
The rear camera image is displayed
Off:
The rear camera image is not displayed
Setting Multi Camera to On/Off
Camera
Signal:
See “Setting the Camera Input” (page 41)
Guide
Adjustment:
See “Adjusting the Rear/Front/Side Camera Guide”
(page 42)
Camera
Interrupt
(Power Mode):
See “Camera Interrupt Setting (Power OFF Mode) (Rear
Camera Only)” (page 43)
Setting Shutdown Delay to On/Off
On:
The rear view image is displayed while the car remains in
reverse. If you shift the gear lever to a position other
than reverse(R), the monitor will display the front*
2, 4
or
rear*
3, 4
view image for 10 seconds and then return to
the previous screen.
Off:
The rear view image is displayed while the car remains in
reverse. If you shift the gear lever to a position other
than reverse(R), the monitor will return to previous
screen immediately.
Summary of Contents for INE-F409E
Page 2: ......
