20
-EN
01GB05iDAX305.fm
ALPINE iDA-X305 68-13530Z16-A (EN)
4
Rotate the
Double Action encoder
to change the
setting, and then press
/ENTER
.
(e.g. Select Beep On or Beep Off.)
5
Press and hold
for 2 seconds to return to normal mode.
•
Pressing
during the procedure will return to the previous mode.
•
During setup, if you press in the outer ring and rotate the
Double
Action encoder
to the left or right, the setting item selection screen
changes page by page. If you press then rotate and hold the
Double
Action encoder
to the left or right, the setting item selection screen
continuously changes page by page.
Select “Bluetooth” from the setup main menu in step 2 above.
If an optional Bluetooth INTERFACE (KCE-400BT) is connected, you
can place a hands-free call by a Bluetooth- equipped mobile phone.
Make this setting when the Bluetooth INTERFACE is connected and the
Bluetooth function is used. For details, refer to the Owner’s Manual of
the optional Bluetooth INTERFACE.
•
When Int Mute is set to On, the Bluetooth setting cannot be made.
When the Bluetooth INTERFACE is connected, set Int Mute to Off.
Refer to “Turning Mute Mode On/Off (Int Mute)” (page 20).
Setting the Bluetooth Connection (Bluetooth IN)
“General” is selected on the setup main menu in step 2.
Setting the Clock Display (Clock Mode)
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
Setting of Calendar Display Pattern Switching (Calendar Type)
You can switch the calendar display pattern to be shown when the time
is displayed.
ex. M/D/Y
Dec/31/2008
Connecting an MP3 Changer (Play Mode)
Perform this setting when connecting MP3 changer. MP3 changer can
playback CDs containing both CD and MP3 data. However, in some
situations (some enhanced CDs), playback may be difficult. For these
special cases, you can select playback of CD data only. When a disc
contains both CD and the MP3 data, playback starts from the CD data
portion of the disc.
•
Change discs after performing this setting.
Sound (Beep) Guide Function
This function will give audible feedback with varying tones depending
upon the button pressed.
Turning Mute Mode On/Off (Int Mute)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
•
When Bluetooth is set to Adapter, Int Mute cannot be set. Refer to
“Setting the Bluetooth Connection (Bluetooth IN)” (page 20).
•
When the Bluetooth INTERFACE is connected, set Int Mute to Off.
Setting Tone Defeat for External Devices (Int Audio)
When inputting external devices to this unit, turning tone defeat on will
bypass Bass Frequency, Treble Frequency, High Pass Filter, i.e., sound
for external devices is output at the default setting.
Setting the Changer Name (CHG Name)
When an optional changer is connected, you can set the displayed mode
name.
•
The setting can be made only when a changer is connected. When
two changers are connected, the CHG1 Name/CHG2 Name is
displayed, and the setting can be made respectively.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional Versatile Link
Terminal (KCA-410C) to this component.
You can change the AUX name display when AUX IN is set to On.
When AUX IN is set to On, select the “AUX Name” mode by rotating
the
Double Action encoder
, then press
/ENTER
.
After that, rotate the
Double Action encoder
to select the desired AUX
name, then press
/ENTER
.
If the KCA-410C is connected, it is possible to select two AUX names.
•
Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press
SOURCE
to select AUX mode and
then press
BAND
to select your desired device.
Setting the AUX+ Mode
You can input the audio of an external device, (such as a Portable audio
player) to the Bluetooth interface connector of this unit. A special
Conversion cable (KCE-237B) is necessary to adapt the Bluetooth
interface connector as an AUX IN.
AUX+ Audio Level Adjustment (AUX+ IN GAIN)
Bluetooth Setting
Bluetooth IN Adapter / Bluetooth IN Off (Initial Setting)
General Setting
24H Type / 12H Type (Initial setting)
M/D/Y (Initial setting) / D/M/Y / Y/M/D
Y :
shows the year
M :
shows the month
D :
shows the day
CDDA (Initial setting) / CDDA & MP3
CDDA :
Only CD data can be played back.
CDDA & MP3 :
Both CD data and MP3 file tracks can be played back.
Beep On (Initial setting) / Beep Off
Int Mute On (Initial setting) / Int Mute Off
Int Audio On / Int Audio Off (Initial setting)
CHG (Initial setting) / PMD
AUX IN On / AUX IN Off (Initial setting)
AUX+ On / AUX+ Off (Initial setting)
AUX+ On :
Set to On when an external device is connected. If
SOURCE
is pressed and Au is selected,
the sound of the external device is input to the unit.
AUX+ Off :
Set to Off when a Bluetooth INTERFACE is
connected.
High (Initial setting) / Low
Low:
Decreases the external input audio level.
High:
Increases the external input audio level.
01GB00iDAX305.book Page 20 Thursday, September 18, 2008 9:55 AM
