Alpine iDA-X301 Owner'S Manual Download

Page: 37 / 44

-EN

• Caused by the iPhone/iPod Software Version not being

compatible with this unit.
- Update the iPhone/iPod Software Version to be compatible

with this unit.

• The iPod is not verified.

- Try another iPod.

• The iPod is not connected.

- Make sure the iPod is correctly connected (refer to

“Connections”).

Make sure the cable is not bent excessively.

• There are no songs in the iPod.

- Download songs to the iPod and connect to this unit.

• Communication error.

- Turn the ignition key off, and then set to ON again.
- Reset the iPod.
- Check the display by reconnecting between the iPod and this

unit using the FULL SPEED™ Connection Cable
(KCE-433iV).

• Caused by the iPod Software Version not being compatible with

this unit.
- Update the iPod Software Version to be compatible with this unit.

• Abnormal current is run to the USB connector device (an error

message may be displayed if the USB device that is not
compatible with the unit is connected).

USB memory is a malfunction or it is shorted.
- Connect another USB Flash Memory device.

• A USB device that is not supported by the unit is connected.

- Connect a USB device that is supported by the unit.

• A USB memory is not connected.

- Make sure the USB memory device is correctly connected and

the cable is not excessively bent.

• No song (file) is stored in the USB memory.

- Connect the USB memory device after storing songs (files).

• A sampling rate/bit rate not supported by the unit is used.

- Use a sampling rate/bit rate that is supported by the unit.

• A copy-protected WMA file was played back.

- You can only play back non-copy-protected files.

• Text information that is not recognizable by the unit has been

input.
- Use a USB memory device with input text information that is

supported by the unit.

• Abnormal current is being drawn by the device connected to

USB. An error message may be displayed if the device
connected is not compatible. The USB Flash Memory device
may be defective.
- Attempt to connect another Portable audio player.

• A Portable audio player that is not supported by the unit is

connected.
- Attempt to connect another Portable audio player.

• A Portable audio player is not connected.

- Make sure the Portable audio player is correctly connected and

the cable is not excessively bent.

• There are no songs in the Portable audio player.

- Download songs to the Portable audio player and connect to

this unit.

• Text information that is no supported on the unit has been input.

- Use a Portable audio player in which text information is input

that is supported on the unit.

Indication for iPod Mode

(Direct Connection), (iDA-X301/

iDA-X301RR only)

Indication for USB memory

CURRENT
ERROR

DEVICE
ERROR

NO USB
DEVICE

Indication for Portable audio player Mode
(iDA-X303 only)

UNSUPORT

NO SUPPORT

CURRENT
ERROR

DEVICE
ERROR

NO USB
DEVICE

NO SONG

NO SUPPORT

Summary of Contents for iDA-X301













































Search results

Summary of Contents for iDA-X301

Reviews:

Related manuals for iDA-X301

Brands by name

Popular brands

Alpine iDA-X301, Owner'S Manual

Search results

Summary of Contents for iDA-X301

Reviews:

Related manuals for iDA-X301

Brands by name

Popular brands