30
-EN
Setting the Auxiliary Data Field Display
(XM only)
The XM Auxiliary Data Field (ADF) display can be switched on or off.
There is no ADF function for the SIRIUS receiver.
1
Press and hold
FUNC./SETUP
for at least 2
seconds to enter the Setup mode.
2
Turn the
Double Action encoder
(iDA-X200 only)
or
Rotary encoder
(iDA-X300 only) to select the
TUNER mode, and then press
/
ENTER
.
3
Turn the
Double Action encoder
(iDA-X200 only)
or
Rotary encoder
(iDA-X300 only)
to select XM
ADF, and then press
/
ENTER
.
4
Turn the
Double Action encoder
(iDA-X200 only)
or
Rotary encoder
(iDA-X300 only) to select ON/
OFF, and then press
/
ENTER
.
When setting to On, Auxiliary Data Field is displayed by
pressing
VIEW
(Refer to the “Changing the Display” section
page 29.)
5
Press and hold
for 2 seconds to return to
normal mode.
•
Pressing
during the procedure will return to the previous mode.
Alpine introduces IMPRINT - the world’s first technology that
thoroughly eliminates in-car acoustic problems that normally degrade
sound quality, which enables us to experience music the way the artist
intended, refer to “About IMPRINT” (page 37).
When the IMPRINT audio processor (PXA-H100) (sold separately) is
connected to this unit, MultEQ and the following sound adjustment can
be performed.
Changing MultEQ mode
MultEQ, developed by Audyssey Labs, automatically corrects the audio
for the listening environment. The system is optimized for selected
positions in the vehicle. To accomplish this, MultEQ must take
measurements of the vehicles response characteristics. For details on the
set up procedure, consult your authorized Alpine dealer.
1
Press and hold
IMPRINT
for at least 2 seconds.
2
Press
/ENTER
.
3
Turn the
Double Action encoder
to select the
MultEQ mode, and then press
/ENTER
.
OFF (Manual Mode)
CURVE 1 (MultEQ-1)
CURVE 2 (MultEQ-2)
OFF (Manual Mode)
4
Press and hold
IMPRINT
for at least 2 seconds to
return to normal mode.
•
The Curve mode can be selected only when curve 1 and curve 2 are
stored.
•
When using MultEQ, MX, X-OVER, Time Correction, Factory’s EQ,
SUBW PHASE, SUBW CHANNEL, TW Setup, EQ Mode, Filter Type,
Parametric EQ and Graphic EQ are set automatically. They are no
longer user adjustable.
•
When an external audio processor is connected, the MultEQ function
cannot be used.
IMPRINT Operation
(Optional)
(iDA-X200 only)
BAND
SOURCE
PRESET
IMPRINT
Double Action encoder
/ENTER
FUNC./SETUP
