11
-EN
Connections
1
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+) 12V
only when the ignition is turned on or in the accessory
position.
2
Battery Lead (Yellow)
Connect this lead to the positive (+) terminal of the vehicle's
battery.
3
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
4
Fuse Holder (7.5A)
5
Power Supply Connector
6
Navigation Connection Cable (Included)
7
XM Antenna Output Connector (Black)
8
XM Antenna Input Connector (Violet)
Connect this to an optional XM antenna.
9
XM Tuner Cable (Included)
Connect the black connector of the cable to this receiver and
the violet connector to the XM radio tuner.
If required, use an optional splitter.*
!
XM Antenna Connector
Depending on the XM tuner connector type, antenna
connection may not be possible.
"
XM Antenna (Sold Separately)
* “NO SIGNAL” is displayed on the XM tuner if the XM
radio tuner cable is not connected when an optional
splitter is used.
• After connecting, confirm that "Traffic Receiver:
Connected" appears in the System Status display. (Refer to
"System Information" in the Owner's Manual of a NVD-
A801 series on page 57.)
IGNITION
BATTERY
GND
Ignition Key
Battery
NVE-N872A
XM compatible Navigation
XM Radio Tuner
(Sold separately)
(Sold separately)
Violet
Black
2
1
3
4
5
7
8
6
9
!
"
