Alpine DVI-9990, Owner'S Manual

Page: 104 / 121

96
-
EN
Remote Control Operation
Operating the Navigation (sold separately)
5
7
6
8
3
4
1
9
(Rear of the Remote Control)
2
TV MONI.
1
NAV. transmission indicator
The transmission indicator lights for few
seconds when the mode selector switch is
set to the “NAV.” side.
2
DTR (DETOUR) Button
Automatically recalculates route if a road
block or traffic congestion is encountered.
3 LIST Button
Displays list of the streets currently set for
the route. To return to the guidance mode,
press the DISP button.
4
DEL. DEST. Button
Deletes current destination.
5 OK Button
Executes numeral inputtings and starts
searching.
6 N/H Button
Toggles between North UP and Heading
UP orientation.
7 MP/RG Button
Toggles between Detailed Map Display and
Basic Guide Display during guidance.
Switches directly to Map when not in
guidance.
8
MODE Button
Press this button to input numerals using
the numeric keypad, DEL. and +10 buttons.
After pressing the MODE button, the
following buttons will be pressed while the
status indicator is blinking: numerals (0-9),
DEL. and +10.
9
Mode change switch
Set this switch to the “NAV.” side to operate
a connected Alpine navigation system.