background image

10

-EN

CD Player Operation

Inserting/Ejecting Disc

1

Insert a CD half way into the slot with the label
side facing up. The player automatically draws
the disc into the disc compartment.

The Disc indicator appears to show that a disc is
loaded.

NOTE

Three-inch (8cm) CD's can be used.

2

Press the 

c

(Eject) button when you want to

eject the CD.

NOTES

If the CD is not removed for several seconds after it
has been ejected, the player automatically draws the
CD into the compartment to protect the CD.

Do not insert or remove a CD forcibly when loading
or ejecting a CD, as malfunction may result.

Normal Play and Pause

1

Insert a CD. The CD player begins playback from
the first track on the disc.

The display shows the track number. When the
last track is played back the player returns to the
first track.

If a CD is already loaded in the CD player, press
the SOURCE button to select the CD mode.

2

Press the 

-

/

J

 button to temporarily stop CD

playback.
To resume playback, press the 

-

/

J

 button

again.

About playable media.

Use only compact discs with the label side showing the
CD logo marks below.

If you use unspecified compact discs, correct
performance cannot be guaranteed.
You can play CD-Rs (CD-Recordable)/CD-RWs (CD-
ReWritable) for audio use on this unit.
However, you cannot play CD-Rs/CD-RWs containing
MP3 formatted audio files.

Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to
extreme temperatures or sunlight (e.g., left in the car
or this unit), CDs recorded under unstable conditions,
CDs not designed for audio use, CDs on which a
recording failed a re-recording was attempted, copy-
protected CDs which do not conform to the audio CD
industry standard.

On handling Compact Discs (CD/CD-R/
CD-RW)

 Do not touch the surface.

 Do not expose the disc to direct sunlight.

 Do not affix stickers or labels and do not write on the

surface.

 Clean the disc when it is dusty.

 Make sure that there are no bumps around the disc.

 Do not use commercially available disc accessories.

Do not leave the disc in the car or the unit for
a long time. Never expose the disc to direct
sunlight.

 Heat and humidity may damage the CD

and you may not be able to play it again.

To customers using CD-R/CD-RW

If a CD-R/CD-RW cannot be played back, make sure
close session (finalization) has been performed.

Finalize the CD-R/CD-RW if necessary, and attempt
playback again.

SOURCE/

POWER

-

/

J

Disc Select buttons
(1 through 6)

c

g

 

f

6

5

4

 

4/10-11_CDM-9821(EN)

03.7.31, 11:27 AM

10

Summary of Contents for CDM-9821























Reviews: