13
-EN
01GB04CDE9874E.fm
ALPINE CDE-9874E 68-09359Z38-A (EN)
*
1
The adjustment can also be made by pressing
Rotary encoder
(CDE-9874E only) or
/
AUDIO
(CDE-9872E only). Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Loudness/Defeat” (page 12).
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal
preference.
1
-1 Press and hold
SOUND
for at least 2 seconds to
activate the Sound Setting mode (CDE-9872E only).
1
-2 Press
SOUND
/
SETUP
(CDE-9874E only) or
SOUND
(CDE-9872E only) repeatedly to select the
TREBLE mode.
BASS
TREBLE
HPF
BASS
2
-1 Press
BAND
to select the desired treble centre
frequency.
10.0 kHz
12.5 kHz
15.0 kHz
17.5 kHz
10.0 kHz
Emphasizes the displayed treble frequency ranges.
2
-2
*
2
Turn the
Rotary encoder
(CDE-9874E only) or
press
and
(CDE-9872E only) to select the
desired treble level (–7~+7).
You can emphasize the treble level.
3
Press and hold
/ESC
for at least 2 seconds to
return to normal mode.
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
•
The treble level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).
•
The function is inoperable when DEFEAT is set to ON.
*
2
The adjustment can also be made by pressing
Rotary encoder
(CDE-9874E only) or
/
AUDIO
(CDE-9872E only). Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Loudness/Defeat” (page 12).
Adjusting the High Pass Filter
The High Pass Filter on this unit can be adjusted to suit your personal
taste.
1
-1 Press and hold
SOUND
for at least 2 seconds to
activate the Sound Setting mode (CDE-9872E only).
1
-2 Press
SOUND
/
SETUP
(CDE-9874E only) or
SOUND
(CDE-9872E only) repeatedly to select the
HPF mode.
BASS
TREBLE
HPF
BASS
2
Turn the
Rotary encoder
(CDE-9874E only) or
press
and
(CDE-9872E only)
to select the
desired HPF frequency.
OFF
80 Hz
120 Hz
160 Hz
All frequencies above the selected cutoff are output.
3
Press and hold
/ESC
for at least 2 seconds to
return to normal mode.
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
•
The function is inoperable when DEFEAT is set to ON.
Setting the Treble Centre Frequency
Setting the Treble Level
68-09359Z38-A_F.book Page 13 Tuesday, September 4, 2007 4:15 PM
