16
-EN
Setting the AUX Mode
(CDM-9807RB/CDM-9805R/CDM-
9803RM/CDM-9803R only)
You can input TV/video sound by connecting an
optional "M-Bus V-Link" (M-Bus/RCA interface
cable KCM-122B) to this component.
1
Press and hold the
F/SETUP
button for at least 3
seconds.
2
Press the
g
or
f
button to select the AUX
mode.
3
Press the
BAND
button to toggle the mode
between AUX ON and AUX OFF.
4
Press the
F/SETUP
button to return to normal
mode.
5
To adjust the volume, etc., first press the
SOURCE/POWER
button and select the AUX
mode, then make the necessary adjustment.
→
TUNER
→
CD
→
AUX
NOTE
When AUX ON is selected, a CD Changer cannot be
used.
Subwoofer On and Off
1
Press and hold the
F/SETUP
button for at least 3
seconds.
2
Press the
g
or
f
button to select the SUB
(Subwoofer) mode.
3
Press the
BAND
button to select Subwoofer ON
or OFF.
4
After setting is completed, press the
F/SETUP
button to return to normal mode.
NOTES
•
Initial mode is "SUB-W ON."
•
Set to "SUBW OFF" unless the subwoofer is used.
•
When the subwoofer is turned on, the subwoofer
output level can be adjusted. For more details, refer
to the Adjusting Volume/Balance/Fader.
Adjusting Source Signal Levels
If the difference in volume level between the CD
player and FM radio is too great, adjust the FM
signal level as follows.
1
Press and hold the
F/SETUP
button for at least 3
seconds.
2
Press the
g
or
f
button to select the FM
LV (FM LEVEL) mode.
3
Press the
BAND
button to select the FM signal
level HI (High) or LO (Low) to make the signal
levels between the FM band and CD player
closer.
4
Press the
F/SETUP
button to return to normal
mode.
SETUP Operations
BAND
f
g
F/SETUP
SOURCE/
POWER
Summary of Contents for CDE-9801R
Page 26: ...24 EN ...
