20
-EN
ALPINE CDE-201R 68-40368Z03-C (EN) 128x182
FW VER
Display
FW UP
Enters f
Updati
comple
ignition
USB de
Audio S
This setup
is off and t
EQ PRESE
Selects
curves
[USER],
[JAZZ],
[COUNT
The eq
for eac
3BAND PE
Adjusts
each af
BAND:
Setting
FREQ],
BALANCE
Adjusts
FADER
Adjusts
SUBWOO
SUBW
Adjusts
[OFF], [
SUBW
Selects
[REVER
LPF FR
Selects
[80Hz],
HPF FREQ
Selects
frequen
Settings
Canceling the DEMO Mode
You can cancel the demonstration display which
appears when the source is off and the clock is
displayed.
1
Press and hold
/SETUP for at least 2
seconds, rotate the control dial to select
[GENERAL], then press it.
2
Rotate the control dial to select [DEMO
MODE], then press it.
3
Rotate the control dial to select [DEMO
OFF], then press it.
The setting is complete.
4
Press
(back) twice.
The display returns to normal reception/play
mode.
Basic Setting Operation
You can set items in the following setup
categories:
General setup (GENERAL), Audio setup (AUDIO),
Display setup (DISPLAY), BLUETOOTH setup
(BLUETOOTH)
1
Press and hold
/SETUP for at least 2
seconds.
2
Rotate the control dial to select the setup
category, then press it.
The items that can be set differ depending on
the source and settings.
3
Rotate the control dial to select the
options, then press it.
To return to the previous display
Press
(back).
General Setup (GENERAL)
AREA
Specifies the area/region to use this unit:
[EUROPE], [RUSSIA].
If the area/region currently set is changed, this
unit is reset, then the clock is displayed.
(Available only while the source is off and the
clock is displayed.)
DEMO MODE
(demonstration)
Activates the demonstration: [ON], [OFF].
CLOCK ADJ
(clock adjust) (page 9)
CAUTION ALM
(caution alarm)
Activates the caution alarm: [ON], [OFF] (page
9).
(Available only while the source is off and the
clock is displayed.)
BEEP
Activates the beep sound: [ON], [OFF].
AUTO OFF
Shuts off automatically after a desired time
when the unit is turned off: [ON] (30 minutes),
[OFF].
USB MODE
Changes the USB mode: [MSC/MTP],
[ANDROID].
(Available only when the USB source is
selected.)
RDS CT
(clock time)
Activates the CT function: [ON], [OFF].
AF/TA
(alternative frequencies/traffic
announcement)
Selects the alternative frequencies (AF) and
traffic announcement (TA) setting: [AF ON],
[TA ON], [AF/TA ON], [AF/TA OFF].
RDS REGIONAL
Restricts reception to a specific region: [ON],
[OFF].
(Available only when FM is received.)
FIRMWARE
(Available only while the source is off and the
clock is displayed.)
Checks/updates the firmware version. For
details, consult your nearest Alpine dealer.
