20
-EN
Option Menu Setting
You can quickly adjust the setting items relevant to the current SOURCE
by using Option Menu.
1
Press and hold
ENTER/OPTION
for at least 2 seconds
to activate the Option menu of the current source.
Note
• The option menu varies depending on the source.
2
Turn the
Rotary encoder
to select the desired setting
item, and then press
ENTER
.
3
Turn the
Rotary encoder
to change the setting, and then
press
ENTER
.
After the setting, the display will return to the current source
automatically.
The following setting items are displayed when MENU LANG is
set to ENGLISH. For details, refer to “Setting the Menu Language”
on page 21.
Setting item:
TUNER mode:
TUNER SET
*1
SOURCE VOL
*2
DIMMER
*3
DISC mode:
CD SET
*4
SOURCE VOL
*2
DIMMER
*3
USB mode:
SOURCE VOL
*2
DIMMER
*3
iPod mode (CDE-192R only):
APP DIRECT
*5
iPod SET
*6
SOURCE VOL
*2
DIMMER
*3
AUX mode:
AUX SET
*7
SOURCE VOL
*2
DIMMER
*3
*1
The setting items are the same as TUNER setting in SETUP
mode. For details, refer to “SETUP” on page 20.
*2
You can individually emphasise or weaken the volume level
of the current source to create your own tonal preference. The
setting values in Option mode and in SETUP mode are
linkage. Refer to “Setting the Source Volume Level” on
page 16.
*3
Refer to “Dimmer Control” on page 21.
*4
PLAY MODE can be selected in this mode. For details, refer
to “Playing MP3/WMA/AAC Data (PLAY MODE)” on
page 21.
*5
Refer to “Setting the iPod Control” on page 23.
*6
The setting items are the same as iPod setting in SETUP
mode. For details, refer to “iPod/iPhone Setting (CDE-192R
only)” on page 22.
*7
AUX NAME can be selected in this mode. For details, refer to
“Setting the AUX NAME mode” on page 21.
Notes
• Press
to return to the previous mode.
• Pressing and holding
for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1
Press and hold
AUDIO
SETUP
for at least 2 seconds to
activate the SETUP mode.
2
Turn the
Rotary encoder
to select the desired item, and
then press
ENTER
.
(e.g. Select GENERAL)
AUDIO
*1
GENERAL
DISPLAY
TUNER
iPod
*2
GENERAL:
MENU LANG
AUX SETUP
*3
AUX NAME
*4
PLAY MODE
DEMO MODE
DISPLAY:
ILLUMINATI
DIMMER
TEXTSCROLL
TUNER:
AF
*5
REGIONAL
*6
PI SEEK
*7
iPod
*2
:
iPod LIST
*1
Refer to “Audio Setup” on page 15.
*2
CDE-192R only.
*3
Not displayed when the current source is AUXILIARY.
*4
Displayed only when AUX SETUP is set to ON.
*5
Refer to “Turning AF (Alternative Frequencies) ON/OFF” on
page 10.
*6
Refer to “Receiving RDS Regional (Local) Stations” on page 11.
*7
Refer to “PI SEEK Setting” on page 11.
3
Turn the
Rotary encoder
to select a setting item, and then
press
ENTER
.
(e.g. Select AUX SETUP)
4
Turn the
Rotary encoder
to change the setting, and then
press
ENTER
.
(e.g. Select AUX ON or AUX OFF)
5
Press and hold
AUDIO
SETUP
for at least 2 seconds to
return to normal mode.
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
AUDIO/SETUP
SOURCE/
/ENTER
Rotary encoder
Summary of Contents for CDE-190R
Page 2: ......
