7
-EN
01GB05CDA9885L.fm
ALPINE CDA-9885L 68-08564Z17-A (EN)
Adjusting Volume
Turn the
Rotary encoder
until the desired sound is
obtained.
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press /
RTN
to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing /
RTN
again will bring the audio back to its
previous level.
Setting the Time and Calendar
1
Press and hold
FUNC./SETUP
for at least 2 seconds
to activate the SETUP selection mode.
2
Turn the
Rotary encoder
to select the GENERAL
mode, and then press
/
/
ENT
.
Bluetooth
GENERAL
AUDIO
DISPLAY
Bluetooth
3
Turn the
Rotary encoder
to select Clock Adjust,
and then press
/
/
ENT
.
4
Turn the
Rotary encoder
to set year.
5
Press /
/
ENT
.
6
Repeat steps 4 and 5 above to set month, day, hour
and minute.
7
Press and hold
FUNC./SETUP
for at least 2 seconds
to return to normal mode.
•
Pressing /
RTN
returns to the previous SETUP mode.
•
If no operation is performed for 60 seconds, SETUP is canceled.
•
To synchronize the clock to another clock/watch or radio time
announcement, press and hold
/
/
ENT
for at least 2 seconds
after setting the “hour.” Minutes will reset to 00. If the display shows
over “30” minutes when you do this, the time will advance one hour.
Listening to Radio
1
Press
SOURCE/
to select TUNER mode.
2
Press
BAND
repeatedly until the desired radio band
is displayed.
FM1
FM2
AM
FM1
3
Press
TUNE/A.ME
to select the tuning mode.
DX (Distance mode)
LOCAL (Local mode)
MANUAL (Manual mode)
DX (Distance mode)
•
The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press
or
to tune in the desired station.
Holding down
or
will change the frequency
continuously.
Presetting Stations Manually
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of the
preset buttons
(1 through 6)
into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
•
A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
•
If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Radio
BAND
/
/ENT/
TUNE/A.ME
Rotary
encoder
SOURCE/
/ESC
Preset buttons
(1 through 6)
68-08564Z17-A_F.book Page 7 Tuesday, December 26, 2006 4:22 PM
