21
-EN
01GB05CDA-9857R.fm
ALPINE CDA-9857R 68-04123Z54-A (EN)
An iPod™ can be controlled from the CDA-9857R/CDA-9856R, when
connected to an optional ALPINE Interface Adapter for iPod™
(KCA-420i). While connected to the CDA-9857R/CDA-9856R through
the KCA-420i, the controls on the iPod™ are disabled.
•
For details, refer to the Owner’s Manual of the connected adapter
(KCA-420i).
•
For each function, refer to the iPod’s documentation.
About iPods™ usable with this unit
•
The unit can be used with third generation and above iPod™,
iPod™ photo, iPod™ minis or iPod™ nano. iPod™ Shuffle
cannot be used, however.
•
Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
•
The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guranteed.
Third generation iPod:Ver. 2.3
Forth generation iPod:Ver. 3.0.2
iPod photo:Ver. 1.1
iPod mini:Ver. 1.3
iPod nano:Ver. 1.0
•
The unit cannot be used with the software versions earlier
than “2005-02-22”. For details about “iPod Software Update”,
refer to the iPod Instruction Manual.
Playback
1
Press
SOURCE/POWER
to switch to the iPod
mode.
TUNER
DISC
iPod
TUNER
2
Press
or
to select the desired song.
3
To pause playback, press
/
.
Pressing
/
again will resume playback.
•
If a song is playing on the iPod when it is connected to the
CDA-9857R/CDA-9856R
, it will continue playing after the
connection.
•
If using the iPod with a changer, the Versatile Link Terminal
(KCA-410C) must be used. In this case, press
BAND
to select the
changer mode applicable to the iPod.
Searching for a desired Song
An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the CDA-9857R/CDA-9856R can use these to
ease song searches.
1
Press
to activate the search selection mode.
2
Turn the
Rotary encoder
to select the Playlist
search mode, then press
.
Playlist
Artist
Album
Playlist
3
*
1
Turn the
Rotary encoder
within 10 seconds, and
select a playlist.
4
Press
/
to play back a selected playlist.
To search for a song in the selected playlist
1 After selecting the playlist in step 3
*
1
, press
to change
to the song search mode of the selected playlist.
2 Turn the
Rotary encoder
within 10 seconds to select a
song and press
MODE
.
The selected song is played back.
•
Press and hold
for at least 2 seconds in the search mode to cancel
the search mode.
•
All songs in the iPod are played back by selecting the stored “iPod
name” in step 3*
1
.
•
Playlist search cannot be made during M.I.X. play.
1
Press
to activate the search selection mode.
2
Turn the
Rotary encoder
to select the Artist search
mode, then press
.
Playlist
Artist
Album
Playlist
3
*
2
Turn the
Rotary encoder
within 10 seconds, and
select an artist.
4
Press
/
to play back all songs of the selected
artist.
To search for an album of the selected artist
1
After selecting the artist in step 3
*
2
, press
to change
to the album search mode of the selected artist.
2
*
1
Turn the
Rotary encoder
within 10 seconds to select an
album.
3
Press
/
to play back all songs of the selected
album.
iPod™ (Optional)
Return to the beginning of the current song:
Press .
Fast backward:
Press and hold
.
Advance to the beginning of the next song:
Press .
Fast forward:
Press and hold
.
SOURCE/
POWER
MODE
Rotary
encoder
4
/
TITLE
5
BAND
Searching by Playlist
Searching by artist name
01GB00CDA-9857R.book Page 21 Thursday, December 1, 2005 4:38 PM
