background image

14

-EN

Titling Discs/Stations

It is possible to title your favorite CD's or radio stations.
You cannot input titles on MP3 discs (when an MP3 compatible CD
changer is connected) and XM Radio Channel.

1

Press 

DISP/TITLE

 

 and select the Title Display.

For details, see “Displaying the Title/Text” (page 13).

2

Press and hold 

DISP/TITLE

 

 for at least 3

seconds.

The first character will blink.

3

Turn the 

Rotary encoder

 to select the desired

letter/numeral/symbol available for naming.

4

Press 

Rotary encoder

 to store the first character.

The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next letter
or symbol of your title.

5

Repeat steps 3 and 4 above to complete the titling.

Pressing the 

Rotary encoder

 after entering the 8th

character automatically stores the title into memory.

When entering a title of less than 8 characters (for
example, 3 character title):
After entering 3 characters, the 4th character space will
be blinking. Go to step 6 to complete the title.

6

Press 

DISP/TITLE

 

 to record the title.

• If you cancel while entering a title, selected characters are not

written.

• You can enter 18 radio station titles and 18 CD titles on this unit. If

you try to store beyond the limit, the display will show “FULL
DATA.” At this point, no more titles can be stored. To input a new
title, one of the previously inputted titles must first be deleted.

• The CD Changer title length or memory capacity varies depending

upon the model being used.

• When you want to erase a title, enter the “

” symbol into all

spaces.

• The operations described in steps 3 to 5 must be made within 10

seconds. The input mode will be canceled if no action is taken for
over 10 seconds.

Erasing Disc Title/Station Title

1

Press 

DISP/TITLE

 

 to select the Title Display.

Then, press again and hold for at least 3 seconds.

2

Within 10 seconds, press and hold 

-

/

J

 for at least

2 seconds.

The title in the display will blink.

3

Press 

g

 or 

f

 repeatedly until the title you

want to erase is displayed.

4

Press and hold 

-

/

J

 for at least 2 seconds to erase

the title displayed.

5

Press 

DISP/TITLE

 

 to cancel the title erasing

mode.

• You cannot erase CD-TEXT.
• "NO DATA" is displayed for 2 seconds if the title is not input in

step 2, or if all titles are erased in step 4.

Displaying Time

Press 

DISP/TITLE

 

 repeatedly until the time is

displayed.

Each press changes the display.
For details, see “Displaying the Title/Text” (page 13).

• Selecting any tuner, XM radio or CD function while in the clock

priority mode will interrupt the time display momentarily. The
function selected will be displayed for about 5 seconds before the
time returns to the display. However, if the channel number is
changed in the XM radio mode, the channel number is displayed
for a few seconds, and then the time display returns.

• When the power is off but the ignition key is on, press 

DISP/TITLE

 to display the time.

Blackout Mode On and Off

When Blackout mode is turned on, the display will turn off to reduce
power consumption. This additional power enhances the sound quality.

Press and hold 

MUTE

 for at least 3 seconds to activate

the blackout mode.

The display will turn off.

• If any button on the unit is pressed during the blackout mode, the

function will be displayed for 5 seconds to show the operation
before returning to Blackout mode.

To cancel Blackout mode, press and hold 

MUTE

 for at least 3

seconds.

Summary of Contents for CDA-9820XM































Reviews: