13
-EN
01GB05CDA105E.fm
ALPINE CDA-105E 68-09359Z81-A (EN)
3
-3
*
5
Turn the
Rotary encoder
to select the desired
bass level (–7~+7).
You can emphasize or weaken the bass level.
4
Press and hold
/
ESC
for at least 2 seconds to
return to normal mode.
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
•
The bass level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The bass
frequency and bass bandwidth settings adjusted for one source are
effective for all other sources (FM, AM, CD, etc.).
•
Depending on the connected devices, some functions and display
indications do not work. However, Bass Level is still adjustable if an
audio processor with the Bass function is connected.
•
When subwoofer is set to OFF and DEFEAT is set to ON, pressing
the SOUND SETUP button momentarily will not be functional.
*
3
When the subwoofer mode is set to OFF, its level cannot be adjusted.
Refer to “Turning Subwoofer ON/OFF” (page 14).
*
4
The function is inoperable when DEFEAT is set to ON.
*
5
The adjustment can also be made by pressing
Rotary encoder
(AUDIO)
. Refer to “Adjusting Subwoofer Level/Bass Level/Treble
Level/Balance (Between Left and Right)/Fader (Between Front and
Rear)/Defeat” (page 12).
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal
preference.
1
Press
SOUND SETUP
to activate the Sound Setting
mode.
2
Turn the
Rotary encoder
to select the TREBLE
Adjustment mode, and then press
/
ENT
.
SUBW LEVEL
*
6
BASS
*
7
TREBLE
*
7
HPF
*
7
SUBW LEVEL
3
-1 Press
BAND
to select the desired treble centre
frequency.
10.0 kHz
12.5 kHz
15.0 kHz
17.5 kHz
10.0 kHz
Emphasizes the displayed treble frequency ranges.
3
-2
*
8
Turn the
Rotary encoder
to select the desired
treble level (–7~+7).
You can emphasize or weaken the treble level.
4
Press and hold
/
ESC
for at least 2 seconds to
return to normal mode.
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
•
The treble level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).
•
Depending on the connected devices, some functions and display
indications do not work. However, Treble Level is still adjustable if
an audio processor with the Treble function is connected.
•
When subwoofer is set to OFF and DEFEAT is set to ON, pressing
the SOUND SETUP button momentarily will not be functional.
*
6
When the subwoofer mode is set to OFF, its level cannot be adjusted.
Refer to “Turning Subwoofer ON/OFF” (page 14).
*
7
The function is inoperable when DEFEAT is set to ON.
*
8
The adjustment can also be made by pressing
Rotary encoder
(AUDIO)
. Refer to “Adjusting Subwoofer Level/Bass Level/Treble
Level/Balance (Between Left and Right)/Fader (Between Front and
Rear)/Defeat” (page 12).
Adjusting the High Pass Filter
The High Pass Filter on this unit can be adjusted to suit your personal
taste.
1
Press
SOUND SETUP
to activate the Sound Setting
mode.
2
Turn the
Rotary encoder
to select the High Pass
Filter (HPF) Adjustment mode, and then press
/
ENT
.
SUBW LEVEL
*
9
BASS
*
10
TREBLE
*
10
HPF
*
10
SUBW LEVEL
3
Turn the
Rotary encoder
to select the High Pass
Filter frequency.
OFF
60 Hz
80 Hz
100 Hz
4
Press and hold
/
ESC
for at least 2 seconds to
return to normal mode.
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
•
When an external audio processor is connected, this setting cannot
be made.
•
When subwoofer is set to OFF and DEFEAT is set to ON, pressing
the SOUND SETUP button momentarily will not be functional.
*
9
When the subwoofer mode is set to OFF, its level cannot be adjusted.
Refer to “Turning Subwoofer ON/OFF” (page 14).
*
10
The function is inoperable when DEFEAT is set to ON.
Turning Loudness On/Off
Loudness introduces a special low-and high-frequency emphasis at low
listening levels. This compensates for the ear’s decreased sensitivity to
bass and treble sound.
Press and hold
Rotary encoder
(
LOUD
) for at least 2
seconds to activate or deactivate the loudness mode.
•
When an external audio processor is connected, this setting cannot
be made.
•
The function is inoperable when DEFEAT is set to ON.
Setting the Bass Level
Setting the Treble Centre Frequency
Setting the Treble Level
01GB00CDA105E.book Page 13 Thursday, November 6, 2008 2:22 PM
