7
INSTALLATION INSTRUCTIONS
USING TOGGLE ANCHORS:
1. Insert metal end of toggle anchor into 1/2” hole.
2. Slide zip strip down snugly against wall.
3. Snap off break-away pieces of toggle anchor (See Figure C Below).
5. Ensure all four (4) screws are tight and snap caps over screw heads.
4. Align holes in changing station with toggle anchors and secure top
left corner of changing station to wall using machine screws and flat
washers. Continue to secure the three(3) remaining corners using
machine screws and flat washers.
ZIP STRIP
BREAK AWAY
PIECES
BREAK AWAY
PIECES
TOGGLE
ANCHOR
BEHIND
WALL
WALL
FIGURE C