Alpine 17PRO - SPX - Car Speaker Manual Download Page 2

•  Read this manual carefully before starting 

operation and use this system safely. We cannot 

be responsible for problems resulting from failure 

to observe the instructions in this manual.

•  This manual uses various pictorial displays to 

show how to use this product safely and to avoid 

harm to yourself and others and damage to your 

property. Here is what these pictorial displays 

mean. Understanding them is important for 

reading this manual.

•  Meaning of displays

Warning

This label is intended to alert the user 
to the presence of important operating 
instructions. Failure to heed the 
instructions will result in severe injury 
or death.

Caution

This label is intended to alert the 
user to the presence of important 
operating instructions. Failure to heed 
the instructions can result in injury or 
material damage

.

 

Warning

DO NOT DISASSEMBLE OR ALTER. 

Doing so 

may lead to accident, fire or electric shock.

KEEP SMALL ARTICLES OUT OF THE REACH 

OF CHILDREN. 

If swallowed, consult a physician 

immediately.

USE ONLY VEHICLES WITH A 12 VOLT 

NEGATIVE (-) GROUND. 

Check with your dealer if 

you are not sure. Failure to do so may result in fire 

or electric shock.

BEFORE WIRING, DISCONNECT THE CABLE 

FROM THE NEGATIVE (-) BATTERY TERMINAL. 

Failure to do so may result in electric shock or 

injury due to electrical shorts.

DO NOT INSTALL IN LOCATIONS WHICH 

MIGHT HINDER VEHICLE OPERATION OR 

CREATE HAZARDS FOR VEHICLE OCCUPANTS. 

Doing so may obstruct forward vision or hamper 

movement.

DO NOT CONTACT, DAMAGE OR OBSTRUCT 

PIPES, FLUID LINES OR WIRING WHEN 

DRILLING HOLES. 

Failure to take such precautions 

may result in fire or cause an accident or injuries.

HALT USE IMMEDIATELY IF A PROBLEM 

APPEARS. 

When problems occur such as a lack 

of sound or video, foreign objects inside the unit, 

smoke coming out, or noxious odors, stop use 

immediately and contact the dealer where you 

bought the equipment. Failure to do so may result in 

an accident or injury.

MAKE THE CORRECT CONNECTIONS. 

Failure to do so may cause fire or accident to occur.

ARRANGE THE WIRING SO IT IS NOT CRIMPED 

OR PINCHED. 

Route the cables and wiring so as 

not to be crimped by moving parts or make contact 

with sharp or pointed spots which might damage the 

wiring. Failure to do so may cause failure of unit or 

vehicle.

DO NOT USE THIS EQUIPMENT FOR 

PURPOSES OTHER THAN STATED FOR THE 

VEHICLE. 

Failure to do so may result in electric 

shock or injury.

HAVE THE WIRING AND INSTALLATION DONE 

BY EXPERTS. 

The wiring and installation of this 

unit requires special technical skill and experience. 

To ensure safety, always contact the dealer where 

you purchased this unit to have the work done.

 

Caution

USE SPECIFIED ACCESSORY PARTS AND 

INSTALL THEM SECURELY. 

Use of other than 

designated parts may damage this unit internally or 

may not securely install the unit in place as parts 

that come loose may create hazards.

DO NOT INSTALL IN LOCATIONS WITH HIGH 

MOISTURE OR DUST. 

A high incidence of 

moisture or dust that penetrates into this unit may 

cause smoke or fire.

Points to Observe for Safe Usage

-EN

Summary of Contents for 17PRO - SPX - Car Speaker

























Reviews: