Alpine Saunas Outdoor Barrel Sauna, Installation Manual

Page: 6 / 19

3. Assemble the ‘Back Panel Parts 1, 2 & 3’ flat on ground with non -oiled side &
bench supports right side up.
Secure the back panel assembly together using 4x ‘5*70mm Screws’ into the
pre- drilled locations below. Screw the 2x ‘Panel Set Securing Pieces’ onto the top
and bottom of the back panel assembly using 22x ‘4*40mm Screws’.
Back Panel Part 2
Rear Middle Panel
Back Panel Part 1&3
Rear Side Panel Left & Right
(Half crescent with no vents or holes.)
Panel Set Securing Pieces