Alpine Saunas Outdoor Barrel Sauna, Installation Manual

Page: 5 / 19

INSTALLATION INSTRUCTIONS
1. Assemble the base using the 3x ‘Cradle Base’ supports and 1x ‘Bottom Stave’
(oiled with two drain holes). Fit the bottom stave into the cradle bases using the
provided grooves on the oiled side of the stave (the stave should hang over the
front cradle further than it does over the back cradle). Screw the bottom stave
into the cradle base supports using 3x ‘4*40mm’ screws. Note that there are no
predrilled holes.
2. Place 7x ‘Staves - Regular Oiled’ on either of the secured bottom stave. Use a
rubber mallet to gently tap the staves together. Use 42 x ‘ 4*40mm screws ’ to fix
the stave s across the ‘cradle base s ’ . Pre-drill holes if required.