23
6. Pre-Setting (Turning on the Sauna at a Desired Time)
To pre-set a time for the Sauna to turn on and start heating follow
these steps:
1. Turn the sauna off and back on again. Then set the desired
temperature and allow it to time out back to the default temp screen.
2. Press “SET” once.
3. Use both the TEMP (to change hours) and TIME (to change minutes)
“UP/DOWN ARROWS” to set a countdown time.
4. No further action required. The system will begin heating to the
set temperature after the set time has elapsed. (e.g. Setting the temp
screen to ‘4’ and the time screen to 30 - at 8AM would start the sauna
heating up at 12:30PM)
7. Lighting
Press the “RBG Lights Button” to turn the lights on.
Continue to press the button to cycle through the available
colours. The last option in the cycle is ‘auto’ mode which will ‘step’
through the colours in a cycle.
Hold down the button to switch the lights off.
