11
Settings - example of use
Switch to constant temperature mode
(
1
) Hold down
+
SET
for 5 seconds, until it shows “0”. Set the value with
and select the password you have set (Factory default is 8).
Press
SET
; if the password is correct the display will show „F0“ and you will be in the settings menu. (Display D1 will blink to show parameter
mode) If the password is incorrect, you will be returned to the temperature display.
(2) In the settings menu, press
to reach menu point “F3”. Press
SET
to apply settings. The display will read “1”(Intelligent mode). With
, change the
value to “0” (constant temperature mode).
(3) Confirm your selection with
SET
to save your selection and return to the settings menu
Or
Use
RST
to save your settings and return to the home screen.
If you do not press any keys within 20 seconds, you will automatically leave settings mode without saving.
Set water temperature - in constant temperature mode
(
1
) The heat exchanger is running in constant temperature mode.
(
2
) Press
SET
; the display will now read “F3”. Change the value with
to “F0” and confi rm your selection with
SET
.
(3) The set temperature value will be displayed. Using
, set this value to your liking.
(4) Confirm your selection with
SET
to save your selection and return to the settings menu.
Or
Use
RST
to save your settings and return to the home screen.
If you do not press any keys within 20 seconds, you will automatically leave settings mode without saving.
Summary of Contents for Eiszeit 2000
Page 1: ...CHILLER 2000 EISZEIT...
Page 2: ...English...
Page 16: ...Deutsch...
Page 30: ...Fran ais...
