5
Dipswitch
Functions
Jumper
Positions
Dipswitches #1 & #2 set the length of door release time for approx. 2, 10, or 25 seconds (See chart above).
Dipswitch #3 will provide a tone at the entrance panel when the call button is pressed.
(you must use ZW as your tone wire to the entry panel).
Dipswitches #4 & #5 allow the Postal Lock to release the door for 25 seconds independent of the #1 & #2 setting.
(works only with 4 wire stations).
Dipswitch #6, when OFF, will only allow the door to release for the time determined by the position of #1 & #2.
If ON, it will continue to stay on past the normal time delay until the
DOOR
Button is released.
Dipswitch #7 when OFF, will require the
TALK
button to be pressed before the
DOOR
Button will release the door.
If ON, the Door release can be activated without talking first.
Summary of Contents for IA543
Page 7: ...7...
