B
dEV-Addr
xxx
(Device
modbus
address)
bAUd-rt
xxxxx*
(Baud-rate
selection
screen)
PAritY
xxxx
(Parity
selection
screen)
This value decides the device ID of the
device on modbus communication.
Range: 001 - 247
This value decides the baud rate for the
modbus communication.
Options: 4800, 9600, 19200, 38400, 57600
* These options have values with varying number of digits..
These options decide the parity and stop bit
parameters.
Options: no 1, no 2, even, odd
quit
Quit screen for serial communication
parameters menu.
(Quit
screen)
b
C
rSt
none
(Reset
parameter
selection)
This value decides the parameter to be reset.
Options - none, ALL , hr, intr, hi, Lo , En , dMd, Ah, t.LoG, LoAd.
or
c
D
rELY
(Relay
output
selection)
This screen is for configuring output as
relays.
or
quit
(Quit
screen) Quit screen for output selection.
or
d
rELY-x
(Relay
output
selection)
This screen selects the relay to be
configured. Using and keys, the user
can cycle through x = 1-2.
PuL-dur (Pulse
duration)
This value sets the pulse width for pulse
output.
Options: 60, 100, 200
PuL-dur
xxx*
(Pulse
duration
selection)
or
quit
(Quit
screen)
Quit screen for output selection.
D1
D3
21
