3.2 Case Dimensions and Panel Cut-Out
3.3 Wiring
Input connections are made directly to screw-type terminals with indirect wire pressure. Numbering is clearly marked on the
connector. Choice of cable should meet local regulations. Terminals for both Current and Voltage inputs will accept upto
2
2
4mm
solid or 2.5 mm stranded cable.
(12AWG)
3.4 Auxiliary Supply
Meter should ideally be powered from a dedicated supply, however powered from the signal source, provided the source
remains within it may be the limits of the Chosen auxiliary voltage range.
3.6 Earth/Ground Connections
For safety reasons, ensure proper grounding of the panel in accordance with local regulations.
56mm
51mm
With optional
Addon Card.
51mm
70mm
75mm
Panel Cutout
92mm+0.8
92
mm+0
.8
3.5 Fusing
It is recommended that all voltage lines are fitted with 1 Amp HRC fuses or circuit breaker to disconnecting the
device.
Note: It is recommended to use wire with Pin type for connection with meter.
Front Display Area
96mm
106mm
96
mm
14
