background image

3

 INTRODuCTION

Thank you for purchasing the alpha

®

 Ecoguard “Type W” Dust Collection Cover.  

The Ecoguard Type W must be used with a vacuum, or other dust collection system.  

To ensure correct use, read this Instruction Manual and the Instruction Manual for 

the power tool and follow the operating instructions.  Keep this manual in a place 

where operators can access it easily whenever necessary!

 abOuT ThE SyMbOlS

According to the hazard level, all safety notes in this manual are classified into 

“DaNGER”,  “WaRNING”, and “CauTION”.

  DaNGER! 

Death or serious personal injury is imminent when handling 

this polisher incorrectly.

  WaRNING!  There is a possibility of death or serious personal injury when 

handling this polisher incorrectly. 

  CauTION! 

There is a possibility of personal injury or property damage 

when handling this polisher incorrectly.

Note:    In some situations, failing to observe WaRNING notes could result in  

death or serious personal injury.  be sure to read and observe the safety 

notes to ensure safety and correct use of the polisher.  

 PRECauTIONS fOR uSING DuST COllECTION COVER

1.  The Dust Collection Cover is for use with a 4.5” (115mm) and 5” (125mm) 

high-speed angle grinder.

2.  The Dust Collection Cover is designed for cutting concrete, stone and other 

masonry products. Do not use when cutting metal or other materials.

3.  The Dust Collection Cover is solely designed for use with a diamond cutting 

wheel. Do not use with any other type of blade such as a conventional 

abrasive blade or carbide tip saw blade.

4.  always check the Dust Collection Cover for damage, cracks or deformation 

before starting work. Do not use the Dust Collection Cover if it is damaged, 

cracked or bent as this could cause to injury.

5.  always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or 

hearing protection must be used for appropriate conditions. 

6.  Keep the Dust Collection Cover away from gasoline, thinner, petroleum 

and paraffin. 

7.  The supplied connector may not connect securely to every high-speed angle 

grinder. In this case, do not use the Dust Collection Cover. 

Summary of Contents for ECOGRDCW

















Reviews: