BRAVE
– user guide
25
3.3.2 Incoming call
Incoming call is a call into door intercom (generated by person inside the
building). After dialling extension number where is connected door
intercom the door interocm line is ringing. After setup number of rings
the door intercom picks up (
parametr 51
) and you can talk. Other
possibilities are the same like in case of outgoing call (capture 3.3.1).
First exception is first 10sec where you can dial "# and service password"
(
parametr 44
). By this you enter programming mode of door intercom.
Second exception is when DIP1 is switch to position (
"SERVIS"
). Then you
enter programming mode directly without dialling service password.
Last exception is relay(s) control (
parametr 381 and 382
). You can by
programming prohibit to control relay(s) from incoming call .
