1
2
3
4. Installation
4.1 Connect Utility and Load
First, connect the UPS with the utility power, then plug the loads into the outlets on the rear of the UPS. To use the
UPS as a master on/off switch, make sure that all of the loads are switched on.
The UPS outlets provide battery backup and surge protection for the equipment when the utility voltage is out of
range.
CAUTION!
For 120V series Model AILI XL 3000, to reduce the risk of fire, connect only to a circuit provided with 30
amperes maximum branch circuit overcurrent protection in accordance with the National Electric Code,
ANSI/NFPA 70
For 120V series Models AILI XL 2200, AILI XL 1500 and AILI XL 1000, to reduce the risk of fire, connect only
to a circuit provided with 20 amperes maximum branch circuit over- current protection in accordance with
the National Electric Code, ANSI/NFPA 70
CAUTION!
Do not connect a laser printer to the UPS outlets! The printer may overload the UPS and shut it down.
Page
17
to
32
