POL
RU
S
FIN
DA
N
SWE
NOR
ENG
22
Operating modes and configuration
ENG
6.1.8 Selection of temperature display/humidity
The display alternately shows the actual or the set temperature as well as the hu-
midity, as required.
1. Press and hold the setting wheel (E) in order to open the configuration menu.
2. Select the symbol “
“ and confirm the selection by shortly pressing the setting
wheel.
• “ACT” for displaying the actual temperature (Default value) or
• “SET” for displaying the set temperature or
• “ACtH” for displaying the actual temperature and the current humidity
6.1.9 Configuration of Alpha IP Base station
This menu allows to configure the Alpha IP Base station in standalone operation.
1. Press and hold the setting wheel (E) in order to open the configuration menu.
2. Select the symbol “
“ and confirm the selection by shortly pressing the setting
wheel.
If the room control unit is taught-in to more than one base stations, select
the desired base station with the setting wheel.
The device parameters “UnP1/UnP2” and the channel parameters “ChAn” are avail-
able in the configuration menu for the Alpha IP Base station; these parameters allow
the modification of the pump lead and follow-up times, setback temperatures, time
intervals and many other parameters.
Information on the configuration possibilities can be found in the Alpha IP
Base station instructions.
