4
Subject to technical amendments without prior notice | 83055800gUK – Translation of the original operating manual | ait-deutschland GmbH
1.4 Contact
Addresses for purchasing accessories, for service
cases or for answers to questions about the device
and this operating manual can be found on the internet
and are kept up-to-date:
●
Germany: www.alpha-innotec.de
●
EU: www.alpha-innotec.com
2 Safety
Only use the device if it is in perfect technical condi-
tion and only use it as intended, safely and aware of
the hazards and under full observance of this operation
manual.
2.1 Proper use
The device is intended exclusively for the following
functions:
●
Heating
● Domestic hot water preparation (optional,
with accessories)
●
Proper use includes complying with the operating
conditions (
“Technical data / scope of sup-
ply”, page 16) and the operation manual and
observing the reference documents.
►
When using the device, observe local regulations:
laws, standards and directives.
Any other use of the device shall be considered im-
proper use.
2.2
Personnel qualifications
The operating manuals supplied with the product are
intended for all users of the product.
The operation of the product via the heating and he-
at pump control and work on the product which is in-
tended for end customers / operators is suitable for all
age groups of persons who are able to understand the
activities and the resulting consequences and can car-
ry out the necessary activities.
Children and adults who are not experienced in hand-
ling the product and do not understand the necessa-
ry activities and the resulting consequences must be
instructed and, if necessary, supervised by persons
experienced in handling the product and who are re-
sponsible for safety.
Children must not play with the product.
The product may only be opened by qualified personnel.
All instructions and information in this operation manu-
al are intended exclusively for qualified and skilled per
-
sonnel.
Only qualified and skilled personnel are able to carry
out the work on the device safety and correctly. Interfer-
ence by unqualified personnel can result in fatal injuries
and material damage.
►
Ensure that personnel are familiar with local regu-
lations, especially those relating to working safely
and in awareness of the hazard risks.
►
Have work on the electrical and electronic compo-
nents carried out only by qualified personnel with
training in the field of “electrical components”.
►
Have any other work on the system carried out by
qualified and skilled personnel only, e.g.
●
Heating installers
●
Plumbers
● Refrigeration plant manufacturers (maintenance
work)
During the warranty and guarantee period, servicing
and repair work may only be carried out by personnel
authorised by the manufacturer.
2.3 Personal protective equipment
There is a risk of cutting your hands on sharp edges of
the device.
►
Wear cut-resistant protective gloves during trans-
port.
2.4 Residual risks
Injuries caused by electric current
Components in the device are live with fatal voltage.
Before opening the device casing:
►
Disconnect the device from the power supply.
►
Protect the device against being switched back on
again.
►
Residual voltage at the inverter. Wait for 90 sec-
onds before opening the device.
Existing earthing connections within housings or on
mounting plates must not be altered. If this should ne-
vertheless be necessary in the course of repair or as-
sembly work:
►
Restore earthing connections to their original con-
dition after completion of the work.
