10
9
TRANSMITTER LEARNING PROCESS
The receiver & transmitter is pre-programmed in factory. If you wish to control 2 or more fans using
1 transmitter, the below steps are required.
DO NOT PRESS ANY OTHER BUTTON DURING THIS PROCESS
Step 1
a) Insert the 2 pcs of batteries (provided) into transmitter.
b) Turn on the power supply (wall switch) to the fan.
c) Within 30 sec, press and hold the “LEARN” button for 3 sec. Once the receiver has detected the frequency,
transmitter will “Beep Beep” twice. Programming process is completed and fan is ready to use.
If the fan is not responding to the transmitter, repeat Step 1b.
IMPORTANT : DO NOT CONNECT THIS REMOTE CONTROL CEILING FAN TO DIMMER SWITCH
OR REGULATOR.
Press and hold
for 3 sec
Learn
Transmitter
AA
A
AA
A
TRANSMITTER FUNCTION
Forward Reverse
Anti-clockwise or
clockwise rotation.
Fan Speed
1 - Lowest speed
8 - Highest speed
1
2
3
4
5
6
7 8
Function of Forward & Reverse
The transmitter & receiver is incorporated with last memory function. This function stores your last setting in
memory and the next time you turn on the fan, fan will operate as the last setting.
Power
Turn off fan
Natural Wind
Fan speed changes within
its range creating gentle
sea-breeze effect.
Timer On
1h - Fan turns on after 1 hour
3h - Fan turns on after 3 hours
6h - Fan turns on after 6 hours
8h - Fan turns on after 8 hours
Fan must be turned on and rotating.
Press and hold Forward/Reverse button for 3 sec fan will slow down and then change direction (approx.
15 sec). When the fan is slowing down to change direction, the Fan Speed function is disabled until
direction has been changed.
Reverse
Fan rotates clockwise drawing the air
towards the ceiling circulating the warm
air downwards. This function works best
at low speed.
Suitable for air-conditioned
condition.
Forward
Fan rotates anti-clockwise blowing
the air downwards creating the
wind chill effect.
Suitable for hot
weather condition.