INSTALLATION INSTRUCTION
Step 3
Remove the Safety Wire screw and spring
washer from the Downrod.
Step 4
Tie the Safety Wire across the hook as shown.
3
4
Step 1
Fix the Rubber Pulley Assembly to the Downrod
with Bolt, Washer, Nut and tighten them firmly,
then insert the Clevis Pin.
IMPORTANT : Clevis Pin MUST be inserted to
prevent Nut from loosening.
PARTS & ACCESSORIES
Motor Assembly with Downrod,
Coupling Cover, Rod Cover
and Canopy
Transmitter & Holder x 1
AAA
AAA
Battery x 2
Receiver
Step 2
Remove the Bolt, Clevis Pin, Nut, Washer and
Rubber Pulley from the Downrod. Place the
Rubber Pulley onto the ceiling hook and fix back
the Bolt, Clevis Pin, Nut and Washer.
IMPORTANT : CLEVIS PIN MUST BE INSERTED
TO PREVENT NUT FROM LOOSENING.
1
2
3
4
5
6
7 8
Fan Blade
AX70-3B/56: 3 pcs
AX70-5B/40: 5 pcs
AX70-5B/56: 5 pcs
Screws
AX70-3B/56: 7 pcs
AX70-5B/40: 11 pcs
AX70-5B/56: 11 pcs
Rubber Pulley Assembly
Bolt
Washer,
Nut &
Celvis Pin
Canopy
Rod Cover
Coupling
Cover
Rubber Pulley
Assembly
Rubber
Pulley
Bolt
Clevis Pin
Washer
Nut
In the case of “J” Hook
is being used.