47 / 55
Figure 59 Date & Time Setting Interface
Step 18:
Click System in the setting
menu. Click Date & Time and set up the
date and time.
Figure 60 Ethernet interface
Step19:
Click Ethernet to set the IP
address. DHCP mode means that setup
IP address is set up automatically.
If you want to set up the IP address
manually, please choose manual mode.
NOTE: It is needed to set the following 3 parameters for manual mode:
IP Address: IP address;
Subnet Mask:
Subnet mask;
Default Gateway: Default gateway;
Automatic display one parameter:
MAC Address:
display MAC Address.
Figure 61 Date & Time Setting Interface
Step 20:
Click Language to set language
Figure 62 Date & Time Setting Interface
Step 21:
Make sure all the following
number is correct.
4.3
EMS Communication Checking
After wiring and EMS setting, check that the status indicators are normal. Then enter
MENU->Status->Communication to check that the communication status of all the
devices are normal.
AC\HYBRID system:
