______________________________________________________________________
Alpha ESS Co., Ltd.
Page 18 of 42
Your Smart Energy
Installation
Step10. In order to remain the earth continuity on battery, Please following the procedure below
for earthing.
Step 11: Open the side panel of the
farthest
battery from the inverter and
remove DIP baffle. Set the DIP switch 2 to
“on” mode.
1. If there is
only one
BAT, DIP switch of BAT should be as below:
Battery Position.
DIP 1
DIP 2
DIP 3
DIP 4
DIP Switch
Battery
OFF
ON
OFF
OFF
2. If there are
two or more than two
BAT, DIP switch of BAT should be as below:
Battery Position.
DIP 1
DIP 2
DIP 3
DIP 4
DIP Switch
Non-bottom
battery
OFF
OFF
OFF
OFF
Bottom battery
OFF
ON
OFF
OFF