zz
___________________________________________________________________
Alpha ESS Co., Ltd.
Page 63 of 69
Your Smart Energy
11.
Uninstallation & Return
11.1
Removing the Product
Procedure
Step 1:
Power off the product by following instructions in Chapter 9.3 Powering Off
the Product.
Step 2:
Disconnect all cables from the product, including communication cables, bat-
tery power cables, AC cables, and PE cables.
Step 3:
Remove the WiFi module.
Step 4:
Remove SMILE-B3-PLUS from the wall bracket.
Step 5:
Remove the mounting bracket.
11.2
Packing the Product
If the original packaging is available, put SMILE-B3-PLUS inside it and then seal it
using adhesive tape.
If the original packaging is not available, put SMILE-B3-PLUS inside a suitable
cardboard box and seal it properly.
11.3
Disposing of the Product
If SMILE-B3-PLUS service life expires, dispose of it according to the local disposal
rules for electrical equipment and electronic component waste.
Dispose of the packaging and replaced parts according to the rules at
the installation site where the device is installed.
Do not dispose SMILE-B3-PLUS with normal domestic waste.
