Old Cod.Q00A00142
OWNER'S MANUAL OF THE MULCH CULTIVATOR PF-PD
New Cod. MANT2010/00493 R.1
COMMISSIONING
- 23
Copyright ©2009 della Alpego spa® - All rights are reserved. Reprinting or unauthorized use of this manual is strictly forbidden without written permission by Alpego spa
The ballast to add is calculated with the formula:
To determine the actual tractor front axle load, the following formula has to be used:
The actual total weight of the tractor/implement combination is calculated as:
The rear axle load is calculated as:
6.2.3. PULLED MACHINE
A
Distance between the centre of gravity of the front machine mounting or the front weight and the
lower link connection (a1 + a2) (m)
1
B
Tractor wheel base (m)
1
C
Distance between the centre of the rear axle and the centre of the lower link connection (m)
1
A1
Distance from the centre of the front axle to the centre of the lower link connection (m)
1
A2
Distance between the centre of the lower link connection point and the centre of gravity of the front
machine mount or front weight (centre of gravity distance) (m)
1
Gv
Front weight (if available) (kg)
3
Gv
Maximum drawbar load (kg)
3
Te
Empty tractor weight (kg)
2
Tv
Front axle load of the empty tractor (kg)
2
Th
Rear axle load of the empty tractor (kg)
2
A2
A1
A
B
C
Gh
FigurE 6-2