OWNER'S MANUAL OF PNEUMATIC FERTILIZER
SPREADER ASF
Old Cod.Q00A00140
New Cod. -
INSTALLATION
- 11
Copyright ©2009 della Alpego spa ® -Tutti i diritti sono riservati. È espressamente vietata la ristampa o l’uso non autorizzato per iscritto da parte di Alpego spa
4.4. RADAR INSTALLATION
The radar is to be positioned as follows on the frame supporting the hopper:
1. Attach the support A to the lower frame of the hopper by means of the U-bolts clamps C
2. Attach the radar B to the support A.
There is only one possible position of the radar on its support, while the latter can be displaced along the slanted
pipe of the frame, so as to guarantee, in the working position, a height from the ground which can vary between 0.4
and 1 m.
In order for the radar to work at its ideal position of ± 37° the hopper must be parallel to the grou nd
while it is working.
4.5. ASSEMBLING THE SEEDER BAR
The operation should be carried out on a horizontal surface,
with the harrow in a stable position and the seed bar positioning
legs inserted.
For the assembly of the seeding bar follow the directions given in the relevant
Owner’s Manual.
4.6. FITTING THE SEED COVERING HARROW
Then the seeder is delivered, the seed covering comb is supplied separately from the machine.
Together with the documents of the machine you will find also the Instructions Manual concerning the
following harrow: it is mandatory to follow it scrupulously.