OWNER'S MANUAL OF PNEUMATIC FERTILIZER
SPREADER ASF
Old Cod.Q00A00140
New Cod. -
SAFETY REGULATIONS
- 7
Copyright ©2009 della Alpego spa ® -Tutti i diritti sono riservati. È espressamente vietata la ristampa o l’uso non autorizzato per iscritto da parte di Alpego spa
3.3. ASSEMBLY OF ELECTRIC AND ALECRONIC INSTRUMENTS AND COMPONENTS
•
The machine is equipped with electronic components which may interfere on other instruments through electro-
magnetic transmission. Said interferences may constitute a risk to people, if the following safety instructions are
not carefully followed.
•
If the assembly of electric or electronic instruments and/or components is done at a later date, the user will have
to test, under his own responsibility if the new addition causes any irregularity to the electronic of the tractor or to
other electronic components.
•
In particular it will be necessary to make sure that the electric or electronic components which are added at a later
date comply with the guidelines CEM 891336/CEE in their most recent valid version and they carry the CE brand
of approval.
•
In case of a later addition of mobile communication systems (i.e. radio, phone etc.) the following requirements
must also be taken into account:
1. Only instruments which comply with the national valid standards may be installed (for instance the
BZT homologation for Germany)
2. The instruments must be installed so they cannot be removed.
3. The use of mobile or portable instruments inside the vehicle is allowed exclusively through a
connection with a fixed external antenna.
4. The transmitter is to be installed far away from the electronic of the vehicle.
5. When the antenna is installed make sure that it is properly installed with a good earth connection
between the antenna and the earth of the vehicle.
For the laying of the cables, the assembly and the maximum power absorption allowed see also the directions
given by the manufacturer of the machine.
3.4. CARRYING OUT MAINTENANCE SAFETY
•
Do not allow unauthorised people to carry out maintenance or tamper with the machine in any manner.
•
Maintenance and repairs should be carried out in suitably equipped workshops.
•
Always use original accessories and spare parts to respect the manufacturer’s requirements. Not using original
parts and accessories renders the guarantee null and void and can cause function irregularities that prejudice
machine safety.
•
When carrying out any operation on the machine always disable the tractor power takeoff, insert the handbrake,
remove the ignition key and make sure that nobody boards the tractor