4.
Once the replacement skewer is in the bike (or not, in the case of a bolt
through axle), the bike is ready to be mounted on the turbo trainer.
5.
Position the bike in-between the couplings and align the skewer with the
lever (it won’t fit exactly at first, as bike frame widths are all different,
halt release the lever and adjust the coupling on the non-lever side by
winding it in or out).
6.
Once the bike is snugly in the frame, adjust the adjustment knob to
make sure the resistance unit touches the rear wheel properly (Do not
over-tighten the adjustment knob because over-tightening will cause
both tire and unit damage and if too loose the bike may come out of the
trainer during use).
7.
Attach the quick release controller to the handlebars in a convenient
place that is within easy reach.
8.
Finally, place the front wheel block under the front tire of your bike and
you are good to go.
NOTE:
To protect the floor or carpet from stain and sweat during workout,
we recommend you put a sheet or mat under the trainer and bike.
3
Summary of Contents for MAGNETIC BIKE
Page 1: ......
