11
CAUTION :
if the water tank or ice cube tank are not in the right position, or if there is not enough water, the
appliance will be on “warning “ mode, the alarm light indicator is red flashing.
• Releasing function :
If the ice maker stops during a round, press start button for more than 3 seconds to release the
remaining ice. Ice maker will then start again after you solve the problem.
C L E A N I N G
C L E A N I N G
• For safety purposes, make sure that the power is on « OFF » position and the appliance is unplugged
before any maintenance, repairing or cleaning operation.
- Clean the case with a soft and dry cloth.
- If the case has accumulated dust or is very dirty, use any mild household cleaner to remove any
stubborn stains, then wipe with clean lightly dampened cloth.
- Clean the water tank with warm water and neutral detergent.
• Do not use alcohol or organic solvent to clean the appliance. Do not use tool to clean ice making
chamber, water tank or ice cube tank.
• If you don’t use the appliance for a long time, you should empty the water tank and the ice cube tank,
and make sure it is dustproof.
• Water tank and ice cube tank can not be use as containers.
T R O U B L E S H O O T I N G
T R O U B L E S H O O T I N G
IF YOU DISCOVER THAT YOUR APPLIANCE HAS UNUSUAL SYMPTOMS PLEASE CHECK THE
FOLLOWING FIRST :
SYMPTOM
POSSIBLE CAUSE / PROBABLE SOLUTION
Alarm indicator flash red without bip
Ice is full, open the ice cube tank and empty it.
Alarm indicator flash red with
2 successive bips
Check the water level.
Alarm indicator flash red with
3 successive bips
Check the ice cube tank is in right position.
Alarm indicator flash red with
4 successive bips
Check the water tank is in right position.
Ice cannot come out.
Check there is nothing block ice making.
Ice is too small
Check the air vent is not blocked or the temperature is
not too high.
The appliance makes no ice.
Check the appliance is correctly plug or the machine is in
time delay protection situation.
notice MG2.1-06 20/04/06 12:11 Page 11
