O P E R A
O P E R A
T I O N S
T I O N S
- The switch is located under the base of the device:
- O …. Off
- I …. On
1. Assemble the device as described above.
2. Plug it into a waterproof outlet after having verified that the voltage corresponds to the
indicated voltage.
3. Press the On button.
M A I N T E N A N C E
M A I N T E N A N C E
1. Turn the device off and unplug it. If the device was on before cleaning, wait until it has
cooled down so you do not burn yourself.
2. With a soft cloth, carefully clean the device. Never use alcohol, solvents or acids such
as vinegar or abrasives.
T R O U B L E S H O O T I N G
T R O U B L E S H O O T I N G
Issues
Potential causes
Solutions
The device will not
The device is not
Remove the plug and plug
turn on.
plugged in properly.
it in again properly.
The plug is defective.
Have it replaced by an
electrician.
The device does not
An object is preventing the
Place it on a flat and stable
work, but the current
On/Off button from working
service. Look for the object
passes through.
properly.
to be removed.
The device functions,
Verify your electrical
Have it checked by an
then suddenly stops
power system/fuse/circuit
electrician.
functioning.
breaker.
S P E C I F I C A
S P E C I F I C A
T I O N S
T I O N S
Model
CT 3000
Voltage
230 V – 50 Hz
Power
3000 W
11
notice_CT3000 22/11/06 17:39 Page 11
