I_505_Aloxy Pulse Instruction Manual EN
6
34
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for
the specific task in accordance with the relevant documentation, in particular its warning notices and
safety instructions. Qualified personnel are those who, based on their training and experience, are
capable of identifying risks and avoiding potential hazards when working with these products/systems.
Proper use of ALOXY products
WARNING
ALOXY products may only be used for the applications described in the manual and in the relevant
technical documentation. If products and components from other manufacturers are used, these
must be recommended or approved by ALOXY. Proper transport, storage, installation, assembly,
commissioning, operation and maintenance are required to ensure that the products operate safely
and without any problems. The permissible ambient conditions must be complied with. The
information in the relevant documentation must be observed.
2
Introduction
2.1
Purpose of this documentation
This instruction manual includes specifications, installation, basic setup and configuration, and
maintenance and troubleshooting information for the ALOXY Pulse.
Do not install, operate, or maintain a ALOXY Pulse without being fully trained and qualified in valve, ,
and accessory installation, operation, and maintenance. To avoid personal injury or property damage,
it is important to carefully read, understand, and follow all of the contents of this manual, including all
safety cautions and warnings. If you have any questions about these instructions, contact your ALOXY
sales office or Local Business Partner before proceeding.
See also
http://www.aloxy.io
2.2
Purpose
The Aloxy Pulse is a multi-purpose industrial Internet-of-Things device and platform that enables
numerous different applications. Typically, it will be attached to (industrial) assets such as valves,
motors, pumps or mobile vehicles to monitor their behavior and state based on its inertial sensors.
Depending on the use-case, the Aloxy Pulse can be programmed or configured to capture signals from
one of its embedded sensors, perform initial pre-processing of the measured data on its
microcontroller and wirelessly transmit the resulting data over one of the supported communication
networks.
