16
GB
Mounting the hood body
• Before hooking up the hood body, adjust the 2
screws Vr located on the hood body connection
points so that they are at the half way point.
• Hook the hood body to the mounted bracket.
• Adjust the screws Vr to level the hood body.
Should the installer consider it necessary, the hood
can be fixed to the wall using two more screws
with wall plugs, which can be positioned from
inside the hood canopy.
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney using either a flexible or rigid
pipe ø 150 or 120 mm, the choice of which is left to the installer.
• To install a ø 120 mm air exhaust connection,
insert the reducer flange 9 on the hood body
outlet.
• Fix the pipe in position using sufficient pipe
clamps (not supplied).
• Remove any activated charcoal filters.
RECIRCULATION VERSION AIR OUTLET
• Push fit connection 15 onto the air outlet.
• Insert the connection extension pieces laterally
14.1 in connection 15.
• Make sure that the outlet of the extension pieces
14.1 is horizontally and vertically aligned with
the chimney outlets. If this is not the case, adjust
the position by either reversing the connection
extension pieces 14.1 or by pushing connector
15 all the way in.
• Ensure that the activated charcoal filters have been
inserted.
9
ø 120
ø 150
Vr
14.1
15
